How to Fix Heel Slippage in Cowboy Boots

If you’ve ever worn cowboy boots, chances are you’ve experienced heel slippage. This frustrating phenomenon can be troublesome, but there are ways to mitigate it. If your boots constantly slip off your heels, you may find it difficult to walk in them. Fortunately, you can do a few things to fix the problem.

How to Fix Heel Slippage in Cowboy Boots

In this blog post, we will discuss some of the methods you can use on how to fix heel slippage in cowboy boots. We will also provide tips on selecting the right pair of boots to prevent this issue. So, whether you’re a seasoned boot wearer or starting, read on for tips to keep your heels in place! Let’s get started!

Summary: To fix heel slippage in cowboy boots, try inserting heel pads or insoles to take up extra space. Another option is to tighten the laces or adjust the buckle to create a better fit. If these solutions don’t work, consider visiting a professional boot fitter who can customize the boots to your feet. In severe cases, the boots may need to be replaced with a better-fitting pair.

What Causes Heel Slippage in Cowboy Boots?

There are a few reasons why cowboy boots may slip off your heels. One common reason is that the boot is too big. If your boots are too loose, they will naturally slide off your heels when you walk. Another possibility is that the heel counter of the boot is not tall enough.

The heel counter is the boot part that wraps around your heel’s back. If it’s not tall enough, it won’t provide enough support, and the boot will slip off. Finally, certain cowboy boots (such as those with pointed toes) are more likely to cause heel slippage. This is because they don’t offer as much support at the front of the foot.

How to Fix Heel Slippage in Cowboy Boots: 10 Effective Solutions

1. Choosing the Correct Size Boots:

One of the primary causes of heel slippage is wearing ill-fitting cowboy boots. Therefore, to fix this problem, you must make sure that you’re selecting the right size cowboy boots in the first place. There are a few different ways that you can do this. First, you can measure your feet using a tape measure and then consult a size chart. Alternatively, you can head to a store that sells cowboy boots and try on a few different pairs until you find the perfect fit.

Select the Right Size Cowboy Boots

2. Wearing Thick Socks:

If you often suffer from heel slippage, one solution is to start wearing thicker socks. This will help fill up any extra space in your boots and prevent your heels from slipping. Just ensure that you don’t go too overboard with the thickness of your socks, as this can make your boots feel uncomfortable. Make sure that, above all, you can still walk comfortably in your boots when wearing thicker socks.

3. Inserting an Insole:

Another heel slippage solution is inserting an insole into your cowboy boots. This will help to fill up any extra space and provide additional support for your feet. You can purchase insoles specifically made for cowboy boots or use any insole that fits well. Be sure to test them out before wearing your cowboy boots for an extended period. If you want to avoid purchasing new insoles, use heel grips or moleskin to help fill the extra space.

4. Wearing Heel Grips:

Heel grips are small, often gel-like pads that stick onto your heel’s back. They help fill up any extra space and provide additional support, preventing heel slippage. You can purchase heel grips at most stores that sell shoe accessories or online. Be sure to test them out before wearing your cowboy boots for an extended period. If the heel grips are too thick, they can make walking difficult.

5. Applying moleskin to the Heel:

Moleskin is a type of fabric that’s often used to prevent or treat blisters. It can also be used to help with heel slippage. To use moleskin for this purpose, cut a small piece of fabric that will fit over the heel area. Then, apply the moleskin to the Heel, ensuring it covers the entire area. You may need to use more than one piece of moleskin if the slippage is severe. Once the moleskin is in place, put your boots on and see if the slippage has improved.

Moleskin Is Used to Treat Blisters

6. Wearing Boot Socks or Liners:

Another way to fix heel slippage is to wear boot socks or liners. These can help to provide additional grip and support for your feet, which can, in turn, help to reduce slippage. There are a variety of different boot socks and liners available on the market, so be sure to choose one that will work well with your specific boots. You may need to replace the liner if your boots are already lined.

7. Use Traction Spray:

Try a traction spray if you want an easy way to stop heel slippage. This spray helps create additional grip between your feet and the boots, preventing slippage. You can find traction spray at most shoe stores or online. To make your traction spray, mix one part of water with one part of rubbing alcohol. This will help you to create enough grip to stop your feet from slipping.

8. Try a Shoe Insert:

If you still have trouble with heel slippage, try using a shoe insert. This will help to create a barrier between your foot and the boot and will also help to add some extra support. There are a variety of inserts available, so be sure to choose one that is comfortable and fits well. You may need to experiment with a few different types before you find the perfect one for you. If your boots are still not fitting well, you may need to try a different size or style.

9. Use Lace Locks:

Try lace locks if you want an extra secure way to fix heel slippage. This will help keep your laces tight and in place. You can find lace locks at most sporting goods stores. When using a lace lock, ensure that the area around your ankle is free of wrinkles. This will help prevent chafing and provide the most support possible. If you want to DIY your lace locks, you can use small pieces of duct tape or electrical tape.

Use Lace Locks

10. Use Sandpaper to Smooth the Surface:

If your cowboy boots are made of smooth leather, you may be able to solve the heel slippage problem by sanding down the surface. This will help to create more grip and prevent your feet from slipping. Be sure to use fine-grit sandpaper, so you don’t damage the leather.

Once you’ve sanded the surface, apply a thin layer of boot cream or polish to help protect the leather. If your boots are suede, you can use a wire brush to help rough up the surface and create more grip.

Tips to Prevent Heel Slippage in Cowboy Boots:

Here we have given some prevention tips on how to fix heel slippage in cowboy boots.

  1. Always buy cowboy boots that fit properly.
  2. Avoid wearing cowboy boots that are too big or too small.
  3. When you first start wearing cowboy boots, break them in gradually.
  4. Wear your cowboy boots with the proper socks.
  5. Be sure to keep your cowboy boots clean and dry.
  6. Inspect your cowboy boots regularly for wear and tear.
  7. Have your cowboy boots resolved if necessary.
  8. Store your cowboy boots properly when you’re not wearing them.

Does Heel Slippage Go Away in Cowboy Boots?

Heel slippage is a common problem with cowboy boots. The popularity of cowboy boots has increased in recent years, but so have the number of complaints about heel slippage. Heel slippage occurs when your foot slips forward and out of the boot while wearing them. This can be extremely dangerous, as it can cause you to trip and fall. However, there are a few things that you can do to prevent heel slippage from occurring in your cowboy boots.

Make Sure the Boots Fit Properly

First, make sure that the boots fit properly. Boots that are too big or too small are more likely to cause heel slippage. Second, try wearing a boot with a higher heel. This will help to keep your foot in place and prevent it from slipping out of the boot. Finally, consider buying a boot with a heel made from a material that grips your foot better. This will help to keep your foot from slipping out of the boot even if it does not fit perfectly. If your cowboy boots are causing you problems with heel slippage, try these tips to help keep your feet in place.

Frequently Asked Questions

Does Heel Slippage Go Away in Cowboy Boots?

Unfortunately, heel slippage does not generally disappear with time or wear. If you’re experiencing this problem, it is often related to the fit of your cowboy boots. It’s important to find a pair of boots that fits well and gives support from the ankle all the way up to your heel. You may also need to make slight adjustments (such as adding padding) depending on how wide your feet are compared to the width of the boot shaft.

If these measures do not solve your problem, you might want consider fitting custom orthotics into your boots in order for them to provide more stability and support. Orthotics can be expensive at first but they usually last longer than regular shoes and tend to alleviate pain when walking or running long distances.

Should Your Heel Slip in Cowboy Boots?

No, your heel should never slip in cowboy boots! Slipping and falling can lead to serious injury, so be sure to take the necessary precautions to avoid any accidents. Here are a few tips that will help you stay safe when wearing cowboy boots:

  1. Wearing the correct size – When shopping for cowboy boots, make sure to select the correct size. Boot sizes can vary significantly, so it’s important to get them fitted properly.
  2. Use a heel strap – A heel strap can help reduce the chance of heel slipping and falling. It is also a good way to ensure that your boots are secure while you’re wearing them.
  3. Wear proper footwear – Make sure that you wear proper footwear when wearing cowboy boots. This includes shoes that fit well and are made from durable materials. Cowboy boots are not meant to be worn with regular shoes!
  4. Stay aware of your surroundings – When you’re out in the open, be sure to stay aware of your surroundings and avoid walking in risky areas. Avoid slippery surfaces and unstable ground, and always watch for obstacles in your path.

These four tips should help you stay safe while wearing cowboy boots, but if you ever do fall or slip, be sure to consult a doctor as soon as possible!

Is Heel Slippage Normal in Boots?

When you wear boots, it is important to be aware of the possibility of heel slippage. This occurs when the boot begins to pull away from your foot creating a gap between them that can cause discomfort and even injury.

To prevent heel slippage, make sure that the width of your toe box is at least 2 inches larger than the width of your boots. If you are having difficulty fitting into certain brands or styles of boots, try going up a size. Additionally, ensure that both sides of each boot are evenly shaped and polished so there is no give or stretch in them when wearing them.

If you experience any pain or discomfort while wearing your boots, do not hesitate to consult with a shoe specialist for further advice on how to correct the situation.


A common problem with cowboy boots is heel slippage. This can cause discomfort and make it difficult to walk in your boots. So, how to fix heel slippage in cowboy boots? There are a few things you can do. You can try adding extra padding to the inside of your boot or use a heel grip product.

If that doesn’t work, you may need to have your boots resolved with a thicker sole. Whichever solution you choose, don’t give up on your cowboy boots! You can make them fit like a glove with a little effort. Have you ever had trouble with heel slippage in cowboy boots? Let us know in the comments below.

Photo of author

Jennifer Branett

I am Jennifer, a passionate blogger since 2016. I like to write informative articles to help peoples in my free time. I am a family person. I have two kids who keep me busy all the time. I always try to give importance to my family. Sometimes it becomes challenging for me to maintain the time along with my family. But I never lose hope. I hope my articles are helping you in some way. If so, You can give me a thumbs up to my inbox, which means a lot to me. Thank you. You can email me at

Leave a Comment