Are your non-slip shoes a mess? Do they look like they’ve been through a mud bath and then run over by a truck? If so, don’t worry; you’re not alone. Cleaning non-slip shoes can be a bit of a pain, but keeping them in good condition is worth it. This blog post will show you how to clean non slip shoes correctly. Read on to learn more.
Summary: Cleaning non-slip shoes can be a bit tricky because of the design of the sole. Start by brushing off any dirt and debris from the outside or topside of the shoe. Then, put some baking soda onto a damp cloth and scrub away at any tough, affected spots on the sole. After that, rinse with a clean cloth and some water to remove the remaining residue.
What Causes Non-Slip Shoes to Get Dirty?
Non-slip shoes are designed for people who work in wet or oily environments. They have a textured sole that helps to prevent slips and falls. However, this same textured sole can also be a magnet for dirt, grime, and debris. For example, if you work in a restaurant kitchen, your non-slip shoes are probably constantly coming into contact with spilled food and grease. Or, if you’re a construction worker, your shoes are likely getting dirty from all the dust and dirt on the job site. Over time, all of this dirt and debris can build up on your shoes, making them look dirty and worn.
Another cause of dirty non-slip shoes is simply wearing them without socks. Socks help to absorb sweat and keep your feet dry. Without socks, your feet are more likely to sweat, and this sweat can cause your shoes to become stained and smelly. Lastly, if you don’t clean your shoes regularly, they will also start to collect dust and dirt from the ground. This can make them look dirty, even if they’ve only been worn a few times.
Things You’ll Need
- Old toothbrush
- White vinegar
- Baking soda
- Water
How to Clean Non Slip Shoes Step by Step Guide
Step 1. Use a Dry Brush
The first step in cleaning non-slip shoes is to use a dry brush. An old toothbrush works well for this. To do this, remove any dirt or mud from the surface of your shoes. Then, brush the shoes with the toothbrush, using circular motions.
Step 2. Make a Mild Cleaning Solution
Once you’ve brushed off the surface dirt, it’s time to make a mild cleaning solution. First, mix together equal parts of white vinegar and water to do this. Then, add a tablespoon of baking soda to the mixture and stir until it’s dissolved. If your shoes are dirty, you may need to make a stronger solution using more vinegar and less water.
Step 3. Hand Wash the Laces and Uppers
Once you’ve made your cleaning solution, it’s time to hand wash the laces and uppers. To do this, first, remove the laces from the shoes. If your shoes have any removable tongue padding or insoles, take those out too. Second, use a soft brush, like a toothbrush, to work the cleaning solution into the fabric of the shoes.
Be sure to get into all the nooks and crannies, especially to areas that tend to get dirty, like the toe box and heel counter. Finally, rinse the shoes with clean water and allow them to air dry.
Step 4. Wash the Soles
After you’ve hand-washed the laces and uppers, it’s time to wash the soles. To do this, scrub the soles with a brush to remove any dirt or debris stuck to them. Then, wash the soles with soap and water. Be sure to rinse them well so that no soap residue is left behind. Finally, dry the soles with a clean towel.
Step 5. Wash and Blot the Uppers
After the soles are clean, it’s time to move on to the uppers. Start by wetting a clean towel with water and blotting the shoes to remove any dirt or mud. If the shoes are extremely dirty, you can also scrub them with a soft-bristled brush. Next, mix a solution of mild soap and water. Dip a clean cloth in the mixture and scrub the shoes gently to remove any remaining dirt. Finally, rinse the shoes with clean water and blot them dry with a towel.
Step 6. Let the Shoes Air Dry
Once you’ve cleaned the shoes and removed as much water as possible, it’s time to let them air dry. Place the shoes in a well-ventilated area and allow them to dry completely before wearing them again. If you live in a humid climate, you may need to place the shoes in front of a fan to help them dry faster. Avoid placing the shoes in direct sunlight, as this can cause the colors to fade.
Tips and Warnings on How to Clean Non Slip Shoes
Tips:
- Be sure to check the care label on your shoes before you begin cleaning them. Some shoes, such as those made of suede or nubuck, require special care and should not be cleaned with water or harsh chemicals.
- If your shoes are white, you can use a mild bleach solution to disinfect them and remove any stains. Rinse the shoes thoroughly afterward and allow them to air dry.
- For stubborn stains, you may need to use a stiff brush or toothbrush to scrub the affected area.
- Always test any cleaning solution on an inconspicuous area of the shoe before using it on the entire shoe. This will help you avoid damaging the material.
- When cleaning shoes made of leather, be sure to use a gentle cleaner and avoid getting the leather too wet.
Warnings:
- Do not put your shoes in the washing machine, as this can damage them.
- Avoid using harsh chemicals on your shoes, as these can damage the material or cause irritation.
- Be sure to air dry your shoes thoroughly after cleaning them, as wet shoes can develop mold and mildew.
- Never wear shoes that are still wet, as this can cause blisters or other foot problems.
- Do not use hot water to clean your shoes, as this can damage the material.
Frequently Asked Questions
How Do You Clean the Bottom of a Non-slip Shoe?
You can clean the bottom of a non-slip shoe in a few different ways. One way is to use a damp cloth and scrub the bottom of the shoe with it. Another way is to use a toothbrush or other small brush to scrub the bottom of the shoe. You can also use a specifically designed cleaner for cleaning the bottom of non-slip shoes.
If you have a lot of dirt and grime build-up on the bottom of your shoes, you may need to use a stronger cleaner or scrubber.
What Is the Best Way to Clean Non Slip Shoes?
The best way to clean non slip shoes will depend on the type of shoes and the material they are made from. A simple wipe-down with a damp cloth should suffice for most types of shoes. If the shoes are made from leather, you may want to use a leather cleaner and conditioner to keep them looking new. Shoes that are made from suede or nubuck should be brushed with a soft-bristled brush to remove any dirt or debris.
If your non-slip shoes have become stained, you may need to use a mild cleanser and scrub brush to remove the stains. Be sure to test the cleaner on an inconspicuous shoe area first to ensure it will not damage the material.
How Often Should I Clean My Non-Slip Shoes?
It would be best if you generally cleaned your nonslip shoes at least once a week. This will help keep them looking new and prevent dirt or grime from building up on the shoes.
However, if you wear your shoes in particularly dirty or muddy conditions, you may need to clean them more often. It is also a good idea to clean your shoes after they have been exposed to salt water or chemicals, as these can cause damage to the materials.
What Products Can I Use to Clean My Non Slip Shoes?
You can use several different products to clean your non slip shoes. For general cleaning, mild soap or detergent will suffice. You can also use a specifically designed shoe cleaner, which you can purchase from most shoe retailers. If your shoes are particularly dirty or stained, you may need to use a stronger cleaning product, such as vinegar or bleach. Always test any cleaning products on an inconspicuous shoe area first to ensure that they will not damage the material.
You Can Check It Out Wash Under Armour Bluetooth Shoes
Conclusion
So there you have it! Here are a few simple tips on how to clean non slip shoes. Non slip shoes are a necessary piece of safety equipment for many professions and activities. Following the simple steps in this guide, you can keep your non-slip shoes clean and free of debris to ensure that they provide the best possible traction when you need them most. Have you tried cleaning your non slip shoes using these methods? Let us know how it went in the comments!
